On underutilization of the loading capacity of universal flat cars using removable multi-turn cargo securing means
https://doi.org/10.46973/0201-727X_2024_4_192
Abstract
The issue of increasing the efficiency of using universal flatcars for the transportation of goods using removable multi-turn cargo securing means (MS) is considered. An overview of serial universal flat cars and an analysis of the use of their carrying capacity in the application of MS are provided. A significant underestimation of the permissible operational load on the rack bracket of the universal flat car is noted in comparison with the calculated values, which leads to underutilization of the carrying capacity of flat cars when transporting goods using MS for placing and securing goods. Some research results are used in developing schemes for placing and securing goods for local technical conditions for the placement and securing of timber.
About the Authors
D. G. Bein
Joint-Stock Company "Scientific and Implementation Center "Vagony"» (JSC «NVC "Vagony"»);
Scientific Research Bureau (NIB)
Russian Federation
Russian Federation
Bein Dmitry Grigorievich, Candidate of Technical Sciences, Deputy Chief Designer of NIB, Full Member of the Russian Academy of Transport
L. V. Tsyganskaya
Joint-Stock Company "Scientific and Implementation Center "Vagony" (JSC «NVC "Vagony"»);
Emperor Alexander I St. Petersburg State Transport University (PGUPS)
Russian Federation
Russian Federation
Tsyganskaya Lyudmila Valerievna, Chair «Wagons and Wagon Facilities», Candidate of Engineering Sciences, Associate Professor, Deputy General Director – Chief Designer of NIB
N. A. Tanicheva
Joint-Stock Company "Scientific and Implementation Center "Vagony" (JSC «NVC "Vagony"»);
Emperor Alexander I St. Petersburg State Transport University (PGUPS);
Scientific Research Bureau (NIB)
Russian Federation
Russian Federation
Tanicheva Natalia Andreevna, Chair «Wagons and Wagon Facilities», Candidate of Engineering Sciences, Associate Professor, Head of the Department of Dynamics of Rolling Stock and Running Gear, NIB
T. M. Chernova
Emperor Alexander I St. Petersburg State Transport University (PGUPS)
Russian Federation
Russian Federation
Chernova Tatyana Mikhailovna, Chair «Wagons and Wagon Facilities», Assistant
References
1. Technical conditions for the placement and securing of goods in wagons and containers : approved by the Ministry of Railways of Russia on May 27, 2003. No. CM-943. – Moscow : Yurtrans, 2003. – 576 p.
2. Technical conditions for the placement and securing of goods. Annex 3 to the Agreement on International Rail Freight Transport (SMGS). Volume 1 : approved by the Committee of the Organization for Cooperation between Railways (OSZhD) on July 1, 2022. – Moscow, 2022. – 490 p.
3. Standards for the calculation and design of wagons for 1520 mm gauge railways of the Ministry of Railways (non-self-propelled) : approved by the Ministry of Railways of Russia on January 22, 1996 – Moscow : GosNIIV-VNIIZhT, 1996. – 319 p.
4. GOST 33211-2014. Freight cars. Requirements for strength and dynamic qualities (with Amendment, with Change No. 1) : approved by Order of Rosstandart No. 565-st dated 05.06.2015. – Moscow : Standartinform, 2020. – 54 p.
5. Models of Freight Cars (SZhA 2004 11) : reference book : approved by the Commission of the Council for Railway Transport of authorized specialists of the wagon industry of railway administrations. Minutes of the meeting of July 10–11, 2002. – URL: https://esnsi.test.gosuslugi.ru/classifiers (date of access: 11/15/2024).
6. Local technical conditions for the placement and securing of unpackaged round timber in flatcars of models 13-6887, 13-6887-01, 13-6887-02, 13-6887-03 with multi-turn securing means according to the VACT.092.00.00.000 project in the zonal dimension of loading : approved by order of the Center for Corporate Transport Services No. CFTO-50/r dated 24.03.2021. // RZD-Partner Documents. – 2021. – No. 881.
7. Utility Model Patent No. 199040. U1 Russian Federation, IPC B61D 17/06. Removable end stop of removable multi-turn equipment of a flat car / D. G. Bein, E. A. Ispolova, L. V. Tsyganskaya, N. A. Tanicheva. – No. 2019126713 : declared 23.08.2019 : published 11.08.2020 /
8. Utility Model Patent No. 197032 U1 Russian Federation, IPC B60P 7/00, B61D 45/00. Removable multi-use device for transporting largecapacity containers on universal flat cars / A. N. Kemezh, A. N. Grishaev, A. A. Shurmakov [et al.] ; No. 2019143587 : declared 24.12.201 9 : published 26.03.2020 ; applicant Joint-Stock Company «First Freight Company» (JSC «PGK»).
9. Morozova, I. O. Experience in operating equipment for transporting timber made of highstrength steels / I. O. Morozova, D. G. Bein, N. A. Tanicheva // Rolling stock of the 21st century : ideas, requirements, projects : materials of the 15th International Scientific Technical Conference. – Saint Petersburg : FSBEI HE PGUPS, 2021. – P. 87 – 88.
Review
For citations:
Bein D.G., Tsyganskaya L.V., Tanicheva N.A., Chernova T.M. On underutilization of the loading capacity of universal flat cars using removable multi-turn cargo securing means. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2024;(4):192-201. (In Russ.) https://doi.org/10.46973/0201-727X_2024_4_192
Views:
16
JATS XML
Email this article 