Research and creation of universal turning cycles of end and longitudinal flutes
https://doi.org/10.46973/0201-727X_2023_2_155
Abstract
Nowadays, one of the most important values in the development of mechanical engineering is the automation of production processes. The main components of the production process are considered to be both automated technological processes of mechanical processing and assembly, with the help of which the necessary productivity and quality of the resulting products are achieved. The use of automated systems consisting of universal machines, CNC machines, machining centers is typical for both serial and small-scale production. For the development of operations on CNC machines and the technological process, certain approaches are necessary because of their features: when using an automatic closed cycle, the value of machine time increases; the influence of the process during operation; the number of operations increases; the use of various tools; the presence of automatic loading, processing, unloading, control, transportation; correction of control programs; fast changeover; execution of various technological operations on one machine; application of basic cycles; integration of automated process control systems into the structure of the organization; creating general and partial management of the entire process.
About the Authors
S. S. Gusev
PJSC «Rostelecom»
Russian Federation
Russian Federation
Gusev Sergey Sergeevich - Energy Engineer
V. V. Makarov
V.A. Trapeznikov Institute of Control Sciences of the Russian Academy of Sciences
Russian Federation
Russian Federation
Makarov Vadim Vladimirovich - Candidate of Engineering Sciences, Associate Professor
References
1. Gordin, P. V. Machine parts and fundamentals of design : a textbook / P. V. Gordin, E. M. Roslyakov, V. I. Evelekov. – Saint Petersburg : NWTU, 2006. – 186 p.
2. Vinokurova, G. F. Descriptive geometry and graphics : guidelines for determining the classification characteristics of the product for students of all specialties / G. F. Vinokurova, E. V. Beloenko. – Tomsk : National Research Tomsk Polytechnic University, 2010. – 36 p.
3. Methodological guidelines for the implementation of working drawings and sketches of parts / N. Y. Smirnov, G. D. Demidova, A. A. Melnikov [et al.]. – Ivanovo : Ivanovo State University of Chemical Technology, 2006. – 72 p.
4. Martynenko, A. A. Automation of the choice of instrumental strategies for machining parts on CNC machines : specialty 05.13.06 «Automation and control of technological processes and productions» : abstract of the dissertation for the degree of Candidate of Engineering Sciences / A. A. Martynenko ; Volgograd State Technological University. – Volgograd, 2012. – 19 p.
5. Miroshnichenko, E. A. Programming technology : a textbook / E. A. Miroshnichenko. – Tomsk : TPU, 1999. – 80 p.
6. Morokina, G. S. Fundamentals of designing devices and systems : an educational and methodological complex / G. S. Morokina, A. I. Potapov. – Saint Petersburg : Saint Petersburg Mining University, 2017. – 148 p. – ISBN 978-5-94170-470-5.
7. Kotsyuba, I. Yu. Fundamentals of information systems design : a textbook / I. Yu. Kotsyuba, A. V. Chunaev, A. N. Shikov. – Saint Petersburg : ITMO University, 2015. – 206 p. – ISBN 978-5-9912-0994-6.
8. Pushkov, R. L. Development of models and tools for the preparation and debugging of parametric programs for CNC systems by technological processes : specialty 05.13.06 «Automation and control of technological processes and productions (technical sciences)» : abstract of the dissertation for the degree of Candidate of Engineering Sciences / R. L. Pushkov ; MSTU «STANKIN». – Moscow, 2018. – 22 p. – ISBN 978-5-7028-0607-5.
9. Grigoriev, S. N. The development of domestic machine–tool construction the foundation of machine-building production / S. N. Grigoriev // Automation in industry. – 2012. – No. 5. – C. 4–7. – ISBN 978-5-7695-6240-2.
10. Software development technology : lecture notes / I. I. Savenko. – Tomsk : Publishing House of Tomsk Polytechnic University, 2014. – 67 p. – ISBN 5-7511-1991-0.
Review
For citations:
Gusev S.S., Makarov V.V. Research and creation of universal turning cycles of end and longitudinal flutes. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2023;(2):155-166. (In Russ.) https://doi.org/10.46973/0201-727X_2023_2_155
Views:
12
JATS XML
Email this article 