Quality control of some composite and heterogeneous materials by modification with nanocomponents
https://doi.org/10.46973/0201-727X_2023_2_139
Abstract
The authors propose for consideration a new approach to the analysis of the formation of the quality level of some composite and other materials when modified with nanocomponents. Not only the issues of modification of the properties of heterogeneous mixtures and composites are investigated, but also technological methods and features of the production of the modifying components themselves are considered. As machines and units for the production of nano-modifying components using graphene derivatives as an example, protected technical solutions are presented in the form of a rotary module for graphite hydro exfoliation and a drum mill. As composite materials and products with new or improved properties, premixes with increased efficiency of use, building concretes with increased strength characteristics, metal-cutting tools with increased damping properties, as well as synthetic lubricants and oils with ultra-low freezing point are offered. The correspondence of these technologies to the general concept of total quality management is formulated.
About the Authors
S. A. Vasin
Tula State University (TulSU)
Russian Federation
Russian Federation
Vasin Sergey Alexandrovich - Chair «Urban Construction, Architecture and Design», Doctor of Engineering Sciences
A. V. Evseev
Tula State University (TulSU)
Russian Federation
Russian Federation
Evseev Alexey Vladimirovich - Chair «Industrial Automation and Robotics», Doctor of Engineering Sciences, Associate Professor
V. F. Pershin
Tula State University (TulSU)
Russian Federation
Russian Federation
Pershin Vladimir Fyodorovich - Chair «Engineering and Technology Production of Nanoproducts», Doctor of Engineering Sciences, Professor
I. A. Yuraskova
Tula State University (TulSU)
Russian Federation
Russian Federation
Yuraskova Irina Andreevna - Chair «Industrial Automation and Robotics», Postgraduate Student, Lecture
References
1. GOST ISO 9000-2011. Quality management systems. Main provisions and vocabulary : interstate standard : put into effect as a national standard of the Russian Federation from January 1, 2013 by Order of the Federal Agency for Technical Regulation and Metrology dated December 22, 2011 No. 1574-st ; reissue : October 2020 – Moscow : Standartinform, 2020. – 28 p.
2. GOST R ISO 9001-2015. Quality management systems. Requirements : National Standard of the Russian Federation: official publication : approved and put into effect by Order of the Federal Agency for Technical Regulation and Metrology dated September 28, 2015 No. 1391-st. – Moscow : Standartinform, 2015. – 24 p.
3. Evseev, A. V. Theory and equipment of deterministic formation of homogeneity of heterogeneous mixture : dissertation for the degree of Doctor of Technical Sciences : 05.02.13 / A. V. Evseev. – Tula, 2021. – 297 p.
4. Vasin, S. A. Prediction of tool vibration resistance during turning and milling / S. A. Vasin. – Moscow : Mashinostroenie, 2006. – 383 p. – ISBN 5-217-03333-9.
5. Patent No. 2280542 Russian Federation, MKI B23 27/00. Cutter / S. A. Vasin, L. A. Vasin, N. N. Borodkin. – No. 2005112363/02 ; filed 25.04.2005 ; published 07.27.2006, Bull. No. 21. – 24 p.
6. Patent No. 2707998 Russian Federation. The method of obtaining a mixture of bulk components and a device for its implementation / A. V. Evseev. – No. 2019104861 ; filed 21.02.2019 ; published 12.03.2019, Bull. No. 34. – 8 p.
7. Patent No. 2783291 Russian Federation. Device for obtaining graphene-containing suspensions by graphite exfoliation / A. V. Evseev, S. A. Vasin, V. F. Pershin. – No. 2022108390 ; filed 29.03.2022 ; published 11.11.2022, Bull. No. 32. – 10 p.
8. Evseev, A. V. Nonmixing / A. V. Evseev // Proceedings of the Tula State University. Technical sciences. – 2019. – Iss. 9. – P. 27–36. – ISSN 2071-6168.
9. Evseev, A. V. Accuracy of discrete metering devices in relation with the criterion of formed mixture quality assessment / A. V. Evseev // Journal of Physics : Conf. Series. – 2019. – Vol. 1260. – P. 032014. – DOI: 10.1088/1742-6596/1260/3/032014.
10. Sokolchik, P. Yu. Forecast and quality control of heterogeneous bulk mixtures / P. Yu. Sokolchik, S. I. Stashkov, M. V. Malimon // Bulletin of the Perm National Research Polytechnic University. Chemical Technology and Biotechnology. – 2013. – No. 1. – P. 64–83. – ISSN 2224-9400.
11. Al-Shiblawi, Karam Ali. Reinforcement of concrete products with polymer composite materials: current state and prospects / Karam Ali Al-Shiblawi, V. P. Yartsev, V. F. Pershin // Online journal “NAUKOVEDENIE”. – 2017. – Vol. 9, No. 6. – 145 p. – eISSN 2223-5167.
12. Weight dosing of granular materials / V. F. Pershin, S. V. Pershina, A. V. Katalymov, V. G. Odnolko. – Moscow : Mashinostroenie, 2009. – 260 p. – ISBN 978-5-94275-484-6.
13. Results of studies of grease modified with multilayer graphene / V. K. Nagdaev, V. S. Vyazinkin, A. V. Zabrodskaya [et al.] // Science in the Central Russia. – 2021. – No. 2(50). – P. 71–77. – DOI: 10.35887/2305-2538-2021-2-71-77.
14. Certificate of state registration of a computer program No. 2023611457 Russian Federation. The program for calculating the quality indicators of mixtures and composites based on the Pareto diagram / A. V. Evseev, S. A. Vasin, D. I. Blagoveshchensky [et al.]. – No. 2023610173 ; filed 09.01.2023 ; registered 09.01.2023.
Review
For citations:
Vasin S.A., Evseev A.V., Pershin V.F., Yuraskova I.A. Quality control of some composite and heterogeneous materials by modification with nanocomponents. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2023;(2):139-145. (In Russ.) https://doi.org/10.46973/0201-727X_2023_2_139
Views:
11
JATS XML
Email this article 