Study of viscoelastic properties of composite materials on the basis of indentation method
https://doi.org/10.46973/0201-727X_2023_4_25
Abstract
A complex theoretical-experimental research has been carried out for studying effect of micron particles of magnesium oxide and boron carbide filler on the viscoelastic properties of epoxy-diane resin composites. Experimental data for the created composites were obtained by indentation method. Identification of mechanical properties of viscoelastic composites on the basis of experimentally obtained diagrams "load-penetration" is carried out on the basis of the created computational algorithm. The results of identification of the Prony's model parameters from experimental creep curves, which were obtained within the framework of the micro indentation method, are presented. The identification of the model parameters was carried out by a hybrid method based on the genetic algorithm and the Nelder – Mead method. This approach provides a stable scheme for the determination of the sought parameters. The presented approach to the study of mechanical properties of materials is effective in the identification of viscoelastic properties of composite coatings.
About the Authors
V. I. Kolesnikov
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Kolesnikov Vladimir Ivanovich, Chair «Theoretical Mechanics», Doctor of Engineering Sciences, Professor, Corresponding Member, Russian Academy of Sciences, Head of the Chair
O. A. Belyak
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Belyak Olga Aleksandrovna, Chair «Theoretical Mechanics», Doctor of Physical and Mathematical Sciences, Associate Professor
T. V. Suvorova
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Suvorova Tatiana Vissarionovna, Chair «Higher Mathematics », Doctor of Physical and Mathematical Sciences, Professor
I. V. Kolesnikov
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Kolesnikov Igor Vladimirovich, Chair «Theoretical Mechanics», Doctor of Engineering Sciences, Professor, Corresponding Member of the Russian Academy of Sciences
S. A. Danilchenko
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Danilchenko Sergey Aleksandrovich, Chair «Theoretical Mechanics», Junior Researcher
References
1. Lyukshin, B. A. Dispersed-filled polymer composites for technical and medical purposes / B. A. Lyukshin, S. V. Shilko, S. V. Panin [et al.]. – Novosibirsk : Siberian Branch of the RAS, 2017. – 311 p. – ISBN 978-5-7692-1546-9.
2. Kolesnikov, V. I. Mathematical models and experimental studies are the basis for the design of heterogeneous antifriction materials / V. I. Kolesnikov, O. A. Belyak. – Moscow : Fizmatlit, 2021. 216 p. – ISBN 978-5-9221-1916-0.
3. Novel preparation of nano-SiO2 core-shell hybrid inorganic-organic sizing agents for enhanced interfacial and mechanical properties of carbon fibers/epoxy composites / Y. Geng, L. Hongfu, Y. Jiawei [et al.] // Composite Structures. – 2023. – Vol. 319. – P. 117086. – DOI 10.1016/j.compstruct.2023.117086.
4. Jin, L. Electrical degradation dynamics of glass fiber-reinforced epoxy composites considering different fiber orientation / L. Jin, Z. Renyong, W. Yuhuai, C. Yun, K. Xiaoxiao, D. Boxue // Composite Structures. – 2023. – Vol. 318. – P. 117083. – DOI 10.1016/j.compstruct.2023.11 7083.
5. Huimin, L. Effects of constructing different unit cells on predicting composite viscoelastic properties / L. Huimin, Z. Boming, B. Guanghui // Composite Structures. – 2015. – Vol. 125. – P. 459– 466. – DOI 10.1016/j.compstruct.2015.02.028.
6. Thermo-viscoelastic properties of silica particulate-reinforced epoxy composites : Considered in terms of the particle packing model / S. C. Kwon, T. Adachi, W. Araki, A. Yamaji // Acta Materialia. – 2006. – Vol. 54, No. 12. – P. 3369–3374. – DOI 10.1016/j.actamat.2006.03.026.
7. Kontou, E. The Effect of Silica Particle Size on the Mechanical Enhancement of Polymer Nanocomposites / E. Kontou, A. Christopoulos, P. Koralli, D. E. Mouzakis // Nanomaterials. – 2023. – Vol. 13, No. 6. – P. 1095. – DOI 10.3390/nano13061095.
8. Papanicolaou, G. C. Viscoelastic behaviour and modelling of nano and micro TiO2 powder-epoxy resin composites / G. C. Papanicolaou, L. C. Kontaxis, A. E. Manara // Ciência & Tecnologia dos Materiais. – 2016. – Vol. 54, No. 2. – P. 138–146. –DOI 10.1016/j.ctmat.2016.02.005.
9. Belyak, O. A. Predicting the Mechanical Properties of Antifriction Composite Materials / O. A. Belyak, T. V. Suvorova // Mechanics of Composite Materials. – 2021. – Vol. 57, No. 5. – P. 647–656. – DOI 10.1007/s11029-021-09986-7.
10. Sevostianov, I. Effective properties of linear viscoelastic microcracked materials : Application of Maxwell homogenization scheme / I. Sevostianov, V. Levin, E. Radi // Mechanics of Materials. – 2015. – Vol. 84. – P. 28–43. – DOI 10.1016/j.mechmat.2015.01.004.
11. An indentation study of the temperaturedependent properties of modified polyurethanes / E. V. Torskaya, A. A. Yakovenko, I. V. Shkaley, A. L. Svistkov // Physical Mesomechanics. – 2023. – Vol. 26, No. 3. – P. 29–38. – DOI 10.55652/1683-805X_2023_26_3_29.
12. Díez-Pascual, A. M. Nanoindentation in polymer nanocomposites / A. M. Díez-Pascual, M. A. Gómez-Fatou, F. Ania, A. Flores // Progress in Materials Science. – 2015. – Vol. 67. – P. 1–94. – DOI 10.1016/j.pmatsci.2014.06.002.
13. Studying epoxy resin reinforced with silica dioxide nanoparticles by microindentation S. V. Smirnov, E. O. Smirnova, I. A. Veretennik ov [et al.] // Diagnostics, Resource and Mechanics of Materials and Structures. – 2017. – No. 1. – P. 24–35. – DOI 10.17804/2410- 9908.2017.1.024-035.
14. Oliver, W. C. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments / W. C. Oliver, G. M. Pharr // Journal materials research. – 1992. – Vol. 7. – No. 6. – P. 1564–1583. –DOI 10.1557/JMR.1992.1564.
15. Lee, E. H. The Contact Problem for Viscoelastic Bodies / E. H. Lee, J. R. M. Radok // Journal of Applied Mechanics. – 1960. – Vol. 27. – P. 438.
16. Christensen, R. M. Mechanics of composite materials / R. M. Christensen – New York : Wiley, 1979. – 320 p. – ISBN 0471051675.
17. Fischer-Cripps, A. C. A simple phenomenological approach to nanoindentation creep / A. C. Fischer-Cripps // Materials Science and Engineering : A. – 2004. – Vol. 385, No. 1–2. – P. 74–82. – DOI 10.1016/j.msea.2004.04.070.
18. Shil'ko, S. V. Determination of rheological parameters of polymer materials by identification of Prony viscoelastic model according to data of static and dynamic tests / S. V. Shil'ko, S. L. Gavrilenko, S. V. Panin, V. O. Aleksenko // Mechanics of machines, mechanisms and materials– 2017. – No. 3(40). – P. 33–38. – ISSN 1995-0470.
19. Oyen, M. L. Sensitivity of polymer nanoindentation creep measurements to experimental variables / M. L. Oyen // Acta Materialia. – 2007. – Vol. 55, No. 11. – P. 3633– 3639. – DOI 10.1016/j.actamat.2006.12.031.
20. Design of double layer protective coatings : Finite element modeling and machine learning approximations / V. I. Kolesnikov, D. M. Pashkov, O. A. Belyak [et al.] // Acta Astronautica. – 2023. – Vol. 204. – P. 869–877. – DOI 10.1016/j.actaastro.2022.11.007.
21. Modeling of the viscoelastic properties of thermoset vinyl ester nanocomposite using artificial neural network / M. A. Omari, A. Almagableh, M. S. Ashhab [et al.] // International Journal of Engineering Science. – 2020. – Vol. 150. – P. 103242. – DOI 10.1016/j.ijengsci.2020.103242.
Review
For citations:
Kolesnikov V.I., Belyak O.A., Suvorova T.V., Kolesnikov I.V., Danilchenko S.A. Study of viscoelastic properties of composite materials on the basis of indentation method. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2023;(4):25-33. (In Russ.) https://doi.org/10.46973/0201-727X_2023_4_25
Views:
4
JATS XML
Email this article 