Methodology for determining the parameters of eccentricity of a hydrodynamic plain bearing
https://doi.org/10.46973/0201-727X_2024_4_34
Abstract
This article is devoted to a newly developed method for calculating the main parameters of the eccentricity of a journal plain bearing taking into account the minimum film size of the liquid lubricant, as well as the value of the additional angular coordinate that determines the position of the shaft eccentricity relative to the load vector in the working gap of the tribosystem under consideration. Experimental studies that fully confirm the results of the theoretical results were carried out on a standard modernized friction machine model II5018 of the “Amsler” type. Based on the developed calculation method, checked for the accuracy of the results in comparison with the results of the experimental studies, a new algorithm, different from the standard one, was obtained for the refined calculation of the parameters of a plain bearing operating in the hydrodynamic lubrication mode.
About the Author
V. N. Polyakov
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Polyakov Vladimir Nikolaevich, Construction Department, Engineer
References
1. GOST ISO 7902-2-2001. Hydrodynamic journal plain bearings operating in steady-state mode. Circular cylindrical bearings. P. 1–3. Date of introduction 01.07.2002. – URL : https://meganorm.ru/Data2/1/4294815/4294815829 (date of access: 11/17/2024).
2. Modern tribology : Results and prospects / E. D. Brown, I. A. Buyanovsky, N. A. Voronin [et al.] ; edited by K. V. Frolov. – Moscow : LKI Publishing House, 2008. – 480 p. – ISBN: 978-5-382-00518-8.
3. Fundamentals of tribology (friction, wear, lubrication) : textbook for technical universities / A. V. Chichinadze, E. D. Braun, N. A. Bushe [et al.] ; edited by A. V. Chichinadze. – Moscow : Mashinostroenie, 2001. – 664 p. – ISBN 5-217-03053-4.
4. Handbook of tribological engineering. In 3 volumes. Vol. 1 / edited by M. Hebda, A. V. Chichinadze // Theoretical basis. – Moscow : Mechanical Engineering, 1989. – 400 p.
5. Calculation model of a radial bearing with a nonstandard support profile / V. N. Bagrova, V. V. Vasilenko, V. I. Kirishchieva, M. A. Mukutadze // Vestnik Rostovskogo Gosudarstvennogo Uni-versiteta Putey Soobshcheniya. – 2021. – No. 2. – P. 17–24. – DOI 10.46973/0201–727X_2021_2_17.
6. Elmanov, I. M. Features of the calibration of friction machines of the "Amsler" type / I. M. Elmanov, G. V. Darovskoy. – Rostov-on-Don : RGUPS, 2010. – 155 p. – ISBN 978-5-88814-293-6.
7. Polyakov, V. N. Eccentricity parameters of a hydrodynamic plain bearing / V. N. Polyakov // Vestnik Rostovskogo Gosudarstvennogo Universiteta Putey Soobshcheniya. – 2024. – No. 2. – P. 188–193. – DOI 10.46973/0201–727X_2024_2_180.
8. Darovskoy, G. V. Procedures for measuring the thickness of a lubricating film using the capacitive method on Amsler-type friction machines / G. V. Darovskoy, V. N. Polyakov, A. N. Opatskikh // Tribology – mechanical engineering: proceedings of the XIII International Scientific and Technical Conference. – 2020. – P. 100–104. – ISBN 978-5-904282-10-3.
9. Kokhanovsky, V. A. Supporting profile of sliding tribosystems / V. A. Kokhanovsky, V. N. Polyakov // Bulletin of Mechanical Engineering. – 2021. – No. 3. – P. 53–56. – DOI 10.36652/0042-4633-2021-3-53-56.
Review
For citations:
Polyakov V.N. Methodology for determining the parameters of eccentricity of a hydrodynamic plain bearing. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2024;(4):34-40. (In Russ.) https://doi.org/10.46973/0201-727X_2024_4_34
Views:
12
JATS XML
Email this article 