Selection of promising materials for centrifugal nozzles of injecting steam coolers
https://doi.org/10.46973/0201-727X_2024_1_240
Abstract
Based on the results of the analysis of information on the destruction and defects of centrifugal nozzles of injection steam coolers (VPO), it was identified the need for selecting a promising material for their manufacture in order to increase their service life. It was described a fundamental approach to carrying out full-scale testing of samples as close as possible to the operating modes of centrifugal nozzles in injection steam coolers including cyclic heating and cooling. Criteria were determined for selecting a promising material for the manufacture of centrifugal nozzles, namely: the structure of the material and the change its hardness, as well as its tendency to crack.
About the Authors
A. Y. Priymak
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Anton Yurievich Priymak, Postgraduate Student
Chair «Machine Design Fundamentals»
Rostov-on-Don
M. Y. Serbinovsky
JSC TKZ «Krasny Kotelshchik»
Russian Federation
Russian Federation
Mikhail Yurievich Serbinovsky, Chief Specialist
Design Bureau
Taganrog
References
1. Protocol of inspection of starting sprays of live steam, Unit 3, run B (12 g), Permskaya GRES Technical Diagnostics Laboratory, 2021. – 14 p.
2. Conclusion No. 12-04/21 based on the results of a study of damage to the spray devices of the starting attemperators of the steam pipeline of live steam, Power unit No. 2, Permskaya GRES technical diagnostics laboratory, 2021 – 14 p.
3. Report No. 4307-380-2021 on the study of the destroyed elements of the atomizers of the starting attemperators of the ТПП-804 boiler of Station 2 of the Permskaya GRES branch, Central Laboratory of PJSC “Krasny Kotelshchik”, 2021. – 28 p.
4. Izrailev, Y. L. Survivability of steam pipelines of aging thermal power plants / Y. L. Izrailev, F. A. Khromchenko. – Moscow : Torus press, 2002. – 616 p.
5. Chernyak, V. N. Improving the reliability of low-pressure spray attemperators of the ТГМП-314 / V. N. Chernyak, N. A. Zroychikov, T. M. Makarova // Teploenergetik. – 1999. – No. 2. – P. 44–47. – ISSN 0040-3636.
6. Copyright certificate No. 2339873. Spray attemperator / A. I. Sivtsov // MKI F22G 5/12. Application dd 20. 04. 2008, Published on 27. 11. 2008. Bulletin No. 33. – 6 p.
7. Report on the research work "Improving the reliability of injecting steam coolers", Design Bureau of PJSC TKZ "Krasny Kotelshchik", 2023, 37 p.
8. Electrodes /Catalog/ Type E-07H19N11M3G2F EA-400/10T – Sudislavsky Welding Materials Plant. – URL: https://www.czcm-weld.ru/catalog/katalog_elektrodov/elektrody_dlya_svarki_vysokolegirovannykh_staley_i_splavov/ea_400_10t/?ysclid=lo8my1fmw0528504405 (date of access: 10/20/2023).
9. Electrodes /Catalog/ Type E-11H15N25M6AG2 EA-395/9 – Sudislavsky Welding Materials Plant. – URL: https://www.czcm-weld.ru/catalog/katalog_elektrodov/elektrody_dlya_svarki_vysokolegirovannykh_staley_i_splavov/ea_395_9/ (date of access: 10/20/2023).
10. Electrodes CL-25/2 / Catalog-NPK Svarelectrod https://svar-electrod.ru/catalog/elektrodyi-czl-252?ysclid=lo8myjaaln575007471 (date of access: 10/20/2023).
11. Welding electrodes CL – 25 / Catalog / SpecElectrod – SpecElectrod – URL: https://www.spetselectrode.ru/electrod/cl25.htm?ysclid=locv2cagsd945030152 (date of access: 10/20/2023).
12. Welding electrodes / Electrodes from Electrogroup / Production of MR, UONI, OZS, ANO / Welding electrodes CL-11 type E-08H20N9G2B – ELECTROGROUP – URL: http://electrodgroup.ru/proizv/176-opizl11/ (date of access: 10/20/2023).
13. Electrodes VPI – 1 / Catalog – NPK Svarelectrod – URL: https://svar-electrod.ru/catalog/e-09x16n9s5g2m2ft/elektrodyi-vpi-1 (date of access: 10/20/2023).
Review
For citations:
Priymak A.Y., Serbinovsky M.Y. Selection of promising materials for centrifugal nozzles of injecting steam coolers. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2024;(1):240-247. (In Russ.) https://doi.org/10.46973/0201-727X_2024_1_240
Views:
75
JATS XML
Email this article 