The system design of noise protection for machine operator of gear hobbing machines
https://doi.org/10.46973/0201-727X_2023_1_49
Abstract
The paper analyses the increased noise levels that occurs and reaches 10–18 dB when performing milling work on gear hobbing machines at the machine operator workplace. It deals with the issues of substantiating the choice of noise protection systems in work processing on gear hobbing machines. The calculation is based on theoretical studies of the noise generation process and experimental data, as well as an acoustic calculation performed when designing noise reduction systems. The technological process of gear hobbing and the layout of the hobbing machine's workplace make it possible to reduce noise at the source of its occurrence. The author proposes the design of noise protection systems for machine operators and presents the results of experimental tests of the system effectiveness.
About the Author
O. G. Kharlamov
Rostov State Transport University (RSTU)
Russian Federation
Russian Federation
Kharlamov Oleg Gennadievich, Chair «Health and Safety», Postgraduate Student
References
1. Chukarin, A. N. Theory and method of acoustic calculations and design of technological machines for mechanical processing / A. N. Chukarin. – Rostov-on-Don : Publishing Center DSTU, 2004. – 152 p. – ISBN 5-7890-0326-5.
2. Life safety : textbook / I. G. Pereverzev, T. A. Finochenko, I. A. Yaitskov [et al.]. – 2nd ed., rev. and add. – Rostov-on-Don : RSTU, 2019. – 308 p. – ISSN 978-5-88814-843-3.
3. Chukarin, A. N. Influence of cutting processes on the noise of milling machines / I. A. Balykov, A. N. Chukarin, D. Z. Evseev // New in safety and life and ecology : Sat. Art. report conf. Oct 14–16 – St. Petersburg, 1996. – Р. 222–223.
4. Balanova, M. V. Methodology and technical support for experimental studies of determining noise at workplaces / M. V. Balanova, T. A. Finochenko, I. A. Yaitskov // Trudy Rostovskogo Gosudarstvennogo Universiteta Putey Soobshcheniya. – 2019. – No. 1 (46). – P. 5–7. – ISSN 1818-5509.
5. Kharlamov, O. G. Identification of factors of the production process when working on gear-cutting machines / A. G. Soldatov, O. G. Kharlamov, T. A. Finochenko // Trudy Rostovskogo Gosudarstvennogo Universiteta Putey Soobshcheniya. – 2021. – No. 2 (55). – Р. 118–120. – ISSN 1818-5509.
6. Kharlamov, O. G. Experimental studies of the noise spectra of gear-cutting machines / O. G. Kharlamov // News of Tul-GU. Technical science. – 2022. – Issue 5. – Р. 391–396. – DOI 10.24412/2071-6168-2022-5-391-397.
7. Borisov, L. P. Soundproofing in mechanical engineering / L. P. Borisov, D. R. Guzhas. – Moscow : Mashinostroenie, 1990. – 256 p. – ISBN 5-217-00885-7.
8. Bolotov, B. E. Methods for reducing the noise of metal-cutting machines / B. E. Bolotov, S. N. Panov // Machine tools and tools. – 1978. – P. 19–20.
Review
For citations:
Kharlamov O.G. The system design of noise protection for machine operator of gear hobbing machines. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2023;(1):49-54. (In Russ.) https://doi.org/10.46973/0201-727X_2023_1_49
Views:
5
JATS XML
Email this article 