Analysing the self-alignment of cylindrical gear wheels with arch teeth
https://doi.org/10.46973/0201-727X_2025_2_96
Abstract
Cylindrical gears with arc teeth make it possible to multiply the durability in terms of the contact and bending strength of gears of power drives of energy-intensive machines operating under conditions of inevitable skew angle of axes. Gears with arc teeth have the property of compensation of the skew angle by axial displacement (self-adjustment) of one of the wheels while ensuring the absence of edge contact of teeth in engagement. In the work an approximate dependence for calculation of displacement value of the touch point (error not more than 1...5 %) of the arc teeth in engagement on the active surface of the arc tooth of the gear in the direction of the axis of its rotation is offered. For the traction cylindrical gear of an electric locomotive with a different degree of localisation of the contact of the arc teeth, the analysis of the value of the self-alignment of the wheel with arc teeth, compensating for the skew (0, 1′, 2′, ...,7′) of the teeth in engagement, as well as the value of the displacement of the half-wheels in order to obtain an adaptive cylindrical gear with arch teeth of two contact zones in engagement.
About the Authors
V. N. Syzrantsev
Tyumen Industrial University, Chair “Machines and Equipment of Oil and Gas Industry”
Russian Federation
Russian Federation
Syzrantsev Vladimir Nikolaevich, Chair “Machines and Equipment of Oil and Gas Industry”, Doctor of Engineering Sciences, Professor, Honoured Worker of Sciences of the Russian Federation, Professor
K. V. Syzrantseva
Tyumen Industrial University, Chair “Machines and Equipment of Oil and Gas Industry”
Russian Federation
Russian Federation
Syzrantseva Ksenia Vladimirovna, Chair “Machines and Equipment of Oil and Gas Industry”, Doctor of Engineering Sciences, Associate Professor
I. S. Serdyuk
Tyumen Industrial University, Chair “Machines and Equipment of Oil and Gas Industry”
Russian Federation
Russian Federation
Serdyuk Ivan Sergeevich, Chair “Machines and Equipment of Oil and Gas Industry”, Postgraduate Student
References
1. Lagutin, S. A. Predetermination of the error function in gears with double modification of teeth / S. A. Lagutin // Space of engagements: collection of reports of the scientific seminar of the Educational and Scientific Center for Gear Drives and Gearbox Engineering. – Izhevsk : Publishing house of Izhevsk State Technical University, 2001. – P. 26–37.
2. Syzrantsev, V. N. Formation of arched teeth of cylindrical wheels and geometric and kinematic characteristics of their engagement : monograph / V. N. Syzrantsev, K. V. Syzrantseva. – Tyumen : TIU, 2023. – 174 p. – ISBN 978-5-9961-3079-5.
3. Syzrantsev, V. N. Cylindrical gears with arched teeth: geometry, strength, reliability : monograph / V. N. Syzrantsev, K. V. Syzrantseva. – Tyumen : TIU, 2020. – 171 p. – ISBN 978-5-9961-2378-0.
4. Arafa, H. A. C-gears : Geometry and Machining, Part C. / H. A. Arafa // Journal of Mechanical Engineering Science. – 2005. – No. 219 (7). – P. 709–726.
5. Jia, F. Modelling and bending strength analysis of cylindrical gears with arcuate tooth trace / F. Jia, L. Hou, Y. Wei, B. Li, Y. You // Australian Journal of Mechanical Engineering. – 2015. – Vol. 13, No. 2. – P. 77–86. – DOI 10.7158/M13-068.2015.13.2.
6. Ma, D. Tooth surface reconstruction and tooth profile geometric analysis of circular arc tooth trace cylindrical gears / D. Ma, Z. Ye, H. Yang // Transactions of FAMENA. – 2019. – Vol. 43, No. 1. – P. 29–44. – DOI 10.21278/TOF.43103.
7. Jiang, Y. Contact ratio calculation of involute arc gear device Academic / Y. Jiang // Journal of Manufacturing Engineering. – 2017. – Vol. 15, No. 3. – P. 19–22.
8. Milling machine error modelling and analysis in the machining of circular-arc-tooth-trace cylin-drical gears / Y. Wu, L. Hou, L. Lan [et al.] // Transactions of FAMENA. – 2021. – Vol. 44, No. 4. – P. 13–29. – DOI 10.21278/TOF.444009419.
9. Zhang, X. Mathematical model and contact characteristics of curvilinear cylindrical gears with line contact / X. Zhang, Z. Liang // Journal of the Brazilian Society of Mechanical Sciences and Engineering. – 2021. – Vol. 43, No. 4. – DOI 10.1007/s40430-021-02894-w.
10. Meshing Contact Impact Properties of Circular Arc Tooth Trace Cylindrical Gear Based on Rotating Knife Dish Milling Process / D. Ma, Y. Liu, Z. Ye [et al.] // Mathematical Problems in Engineering. – 2021. – DOI 10.1155/2021/8819818.
11. Pat. 2721579 Russian Federation, MPK F 16 N 1/06. Adaptive spur gear with arched teeth / V. N. Syzrantsev, K. V. Syzrantseva, V. P. Vibe, Yu. G. Denisov. – No. 2019136799 ; declared. 15.11.2019 ; published. 20.05.2020, Bulletin No. 14. – 1 p.
12. Syzrantsev, V. N. Calculation of the geometric and kinematic characteristics of the engagement of the arc teeth of a cylindrical gear with errors in the relative position / V. N. Syzrantsev, A. I. Starikov // Bulletin of the South Ural State University. Ser. Mechanical Engineering Industry. – 2023. – Vol. 23, No.1. – P. 5–18. –DOI 10.14529/engin230101.
13. Syzrantsev, V. N. Improving the reliability of the operation of arched cylindrical gears based on the determination of the boundary values of displacement that ensure the wheels touch / V. N. Syzrantsev, A. I. Starikov // Vestnik MSUT “Stankin”. – 2023. – No 4 (67). – P. 93–102. – DOI 10.47617/2072-3172_2023_4_93.
14. Grishko, V. A. Increase of wear resistance of toothed gears / V. A. Grishko. – Moscow : Mashinostroenie, 1977. – 232 p.
15. Syzrantsev V. N. Calculation of the load distributed over the contact area in the meshing of straight and barrel-shaped teeth under conditions of their skewing / V. N. Syzrantsev, K. V. Syzrantseva, I. S. Serdyuk // Fundamental and Applied Problems of Engineering and Technology. – 2024. – No (365). – P. 52–61.– DOI 10.33979/2073-7408-2024-365-3-52-61.
16. Syzrantsev, V. N. Synthesis of an adaptive cylindrical gear with arched teeth with two contact zones / V. N. Syzrantsev, A. I. Starikov // Omsk Scientific Bulletin. – 2023. – No. 4 (188). – P. 38-45. – DOI 10.25206/1813-8225-2023-188-38-45.
Review
For citations:
Syzrantsev V.N., Syzrantseva K.V., Serdyuk I.S. Analysing the self-alignment of cylindrical gear wheels with arch teeth. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2025;(2):96-105. (In Russ.) https://doi.org/10.46973/0201-727X_2025_2_96
Views:
11
JATS XML
Email this article 