Analysis of the design solution of an “intelligent” cutting tool for turning operations
https://doi.org/10.46973/0201-727X_2024_1_196
Abstract
The invention proposes a design implementing the principle of self-regulation with the help of an elastic element which improves its value at increasing cutting forces, for working out the technical solution of the “intelligent” tool with control of the front angle of the cutting wedge for section turning operations. It is considered the results of simulating conditions of equilibrium of forces acting on cutter rotary sector with variable front angle at section operations. The technical feasibility of the proposed technical solution with front angle self-regulation has been confirmed. The recommendations on selection of parameters of self-adjustment unit are obtained. It is determined the conditions of most effective use of proposed cutter device. The technical feasibility of the proposed technical solution for an “intelligent” tool for controlling the cutting process along the front angle of the cutting wedge during cutting operations has been confirmed.
About the Author
O. A. Erzin
Tula State University (TulSU)
Russian Federation
Russian Federation
Oleg Alexandrovich Erzin, Candidate of Engineering Sciences, Associate Professor
Chair «Industrial Automation and Robotics»
Tula
References
1. Sellmer, D. High-performance processing by means of the “intellektualnyq” cutting tools / D. Sellmer // Werkstatt und Betrieb. – 2001. – No. 3. – P. 38–40.
2. Shadskiy, G. V. Principles of regulation of the external impact vector direction at blade material destruction in real time mode / G. V. Shadskiy, V. S. Salnikov, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2018. – No. 10. – P. 585–590. – ISSN 2071-6168.
3. Shadsky, G. V. Prospects of controlling the kinematic angles of the cutting wedge at turning operations / G. V. Shadsky, V. S. Salnikov, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2019. – Issue. 12. – P. 342–349. – ISSN 2071-6168.
4. Shadsky, G. V. Analysis of technical possibilities by kinematic angles of a cutting wedge at turning / G. V. Shadsky, V. S. Salnikov, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2019. – Issue. 12. – P. 360–367. – ISSN 2071-6168.
5. Patent RU2741397C1. Cutter with variable front angle / G. V. Shadsky, V. S. Salnikov, O. A. Erzin. – No. RU2020129113A ; application form 09. 02. 2020 ; published 01/25/2021.
6. Salnikov, V. S. Analysis of the design solution of the “intellectual” cutting tool with a controlled front angle / V. S. Salnikov, G. V. Shadskiy, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2022. – Issue. 10. – P. 400–406. – DOI: 10.24412/2071-6168-2022-10-400-406.
7. Shadskiy, G.V. Synthesis of the control system of the cutting wedge front angle at turning / G. V. Shadskiy, V. S. Salnikov, O. A. Erzin // Proceedings of the Tula State University. Technical sciences. – 2021. – Issue. 8. – P. 313–322. – DOI: 10.24412/2071-6168-2021-8-313-322.
8. Shadskiy, G. V. Robust control of the cutting wedge front angle during turning / G. V. Shadskiy, V. S. Salnikov, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2021. – Issue. 8. – P. 297–302. – DOI: 10.24412/2071-6168-2021-8-297-302.
9. Shadskiy, G. V. Parametrization of the control system of the cutting wedge front angle for turning operations / G. V. Shadskiy, V. S. Salnikov, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2021. – Issue. 9. – P. 620–629. – DOI: 10.24412/2071-6168-2021-9-620-629.
10. Salnikov, V. S. Prospects of the cutting wedge front angle control at technological conditionality of the cutting speed change / V. S. Salnikov, G. V. Shadskiy, O. A. Erzin // Proceedings of the Tula State University. Technical Sciences. – 2023. – No. 12. – P. 276–284. – DOI: 10.24412/2071-6168-2023-12-276-277.
11. Silin, S. S. Similarity methods in cutting of materials / S. S. Silin. – Moscow : Mashinostroenie, 1979. – 162 p.
12. Bezyazichny, V. F. Calculation of cutting modes : tutorial / V. F. Bezyazichny, I. N. Averyanov, A. V. Kordyukov. – Rybinsk : RSATA, 2009. – 185 p.
13. Shadskiy, G. V. Discrete model of a chip motion on the front surface of a cutting wedge / G. V. Shadskiy, O. A. Erzin, V. S. Salnikov // Proceedings of the Tula State University. Technical Sciences. – 2016. – Issue. 11. – Part 2. – P. 553–560. – ISSN 2071-6168.
14. Shadskii, G. V. Dynamic Aspects of Chip Formation / G. V. Shadskii, O. A. Erzin, S. V. Salnikov // Russian Engineering Research. – 2018. – Vol. 38. – No. 2. – P. 130–134.
Review
For citations:
Erzin O.A. Analysis of the design solution of an “intelligent” cutting tool for turning operations. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2024;(1):196-204. (In Russ.) https://doi.org/10.46973/0201-727X_2024_1_196
Views:
36
JATS XML
Email this article 