Main directions for design of mechanical disk hopper loading devices for asymmetric parts of rotation bodies shape
https://doi.org/10.46973/0201-727X-2023-1-8
Abstract
The paper considers the stages of designing mechanical disk hopper loading devices, during which high reliability and the required performance of systems for automatically loading asymmetric parts of the shape of rotation bodies into modern technological equipment will be ensured. The main tasks of each stage and ways to solve them are shown, which contribute to improving the reliability and ensuring the required capacity of the hopper loading device for parts with asymmetry. The solution of the tasks in the specified order allows, at the early stages of design, to develop the design of the bunker loading device that is optimal in all respects and does not require expensive investments in the creation of prototypes for testing to evaluate its performance.
About the Authors
S. A. Vasin
Tula State University (TulSU)
Russian Federation
Russian Federation
Vasin Sergey Alexandrovich, Chair «Urban Construction, Architecture and Design», Doctor of Engineering Sciences, Professor
E. V. Pantyukhina
Tula State University (TulSU)
Russian Federation
Russian Federation
Pantyukhina Elena Viktorovna, Chair «Industrial Automation and Robotics», Candidate of Engineering Sciences, Associate Professor
References
1. Pistol and sniper cartridges. Grenade launchers / V. K. Zelenko, A. V. Bryzzhev, V. V. Zlobin, V. M. Korolev. – Tula, Infra, 2008. – 120 p.
2. Dyakova, E. V. Designing systems for automatic loading of parts of the shape of rotation bodies with asymmetry at the ends / E. V. Dyakova, E. V. Pantyukhina // Automation and energy saving in mechanical engineering, energy and transport: Materials of the XVI International Scientific and Technical Conference. – Vologda, 2022. – P. 31–38. – ISBN 978-5-907606-00-5.
3. Yadykin, E. A. Assessment of intermittent failures of stationary systems for automatic loading of technological rotary machines / E. A. Yadykin, E. V. Davydova // Izvestia of Tula State University. Technical sciences. – 2015. – No. 10. – P. 107–112. – ISSN 2071-6168.
4. Pantyukhina, E. V. Problems of automatic loading of parts of the shape of rotation bodies with implicit asymmetry with traditional loading devices / E. V. Pantyukhina // Modern technologies in science and education – MTSE– 2021 : Collection of works of the IV International Scientific and Technical Forum: in 10 volumes. – Ryazan, 2021. – P. 95–101. – ISBN 978-5-7722- 0327-9.
5. Pantyukhina, E. V. Mechanical disk hopper feeding devices for rod parts with implicitly expressed orientation keys / E. V. Pantyukhina, V. V. Preys, A. V. Khachaturian // Automation and measurements in machine and instrumentation. – 2018. – No. 3 (3). – P. 16–25. – ISSN 2658-4727.
6. Pantyukhina, E. V. Mechanical bunker feeding devices for small arms cartridge elements with implicit asymmetry / E. V. Pantyukhina, V. V. Preys // Innovative technologies and technical means of special purpose : proceedings of the twelfth all-Russian scientific and practical conference: in 3 volumes. V. 2. – St. Petersburg, 2020. – P. 79–85. – ISBN 978-5-94652-656-2.
7. Automatic feeding of technological machines: Reference book / I. S. Blyakherov, etc.; under the general edition I. A. Klusova. – Moscow : Mechanical, 1990. – 400 p. – ISBN 5-217-01111-4.
8. Boothroyd, G. Assembly Automation and Product Design / G. Boothroyd // Second Edition (CRC Press, Taylor & Francis Group). – 2005. – 536 p. – ISBN 9780429121258.
9. Ghosh, S. Assembly Line – Theory and Practice / S. Ghosh, S. P. Singh. – Rijeka, Croatia : InTech Europe, 2011. – P. 149–178. – ISBN 978-953-307-995-0.
10. Automation of press feeding with piece blanks / V. F. Preys, I. S. Blyakherov, V. V. Preis, N. A. Usenko; edited by V. F. Preys. – Moscow : Mechanical, 1975. – 280 p.
11. Medvid, M. V. Automatic orienting loading devices and mechanisms / M. V. Medvid. – Moscow : Mashgiz, 1963. – 299 p.
12. Pantyukhina, E. V. Integrated approach methodology for evaluating the loading device mechanical disk hopper-feeding devices / E. V. Pantyukhina // IOP Conf. Series : Journal of Physics : Conference Series. – 2020. – Vol. 1546. – P. 012024. – DOI 10.1088/1742-6596/1546/1/012024.
13. Pantyukhina, E. V. Passive orientation of parts in a mechanical disk hopper loading device with an annular orientator and radial grooves / E. V. Pantyukhina, V. V. Preys, O. V. Pantyukhin // Dynamics of systems, mechanisms and machines. – 2020. – V. 8. – No. 2. – P. 73–83. – ISSN 2310-9793.
14. Pantyukhina, E. V. Development of software for calculating the actual capacity of hopper loading devices for parts with implicitly expressed asymmetry of the ends / E. V. Pantyukhina // Izvestia of Tula State University. Technical sciences. – 2020. – No. 9. – P. 433–441. – ISSN 2071-6168.
Review
For citations:
Vasin S.A., Pantyukhina E.V. Main directions for design of mechanical disk hopper loading devices for asymmetric parts of rotation bodies shape. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putej Soobshcheniya. 2023;(1):8-15. (In Russ.) https://doi.org/10.46973/0201-727X-2023-1-8
Views:
8
JATS XML
Email this article 